Things To Know Before You Buy & Install Cylinder Head Parts
![Discover Things To Know Before You Buy & Install Cylinder Head Parts For Your Vehicle Discover Things To Know Before You Buy & Install Cylinder Head Parts For Your Vehicle](/cms/engine-components--cylinder-head-parts/images/engine-components--cylinder-head-parts-desktop.jpg)
![Discover Things To Know Before You Buy & Install Cylinder Head Parts For Your Vehicle Discover Things To Know Before You Buy & Install Cylinder Head Parts For Your Vehicle](/cms/engine-components--cylinder-head-parts/images/engine-components--cylinder-head-parts-desktop.jpg)
What Is Cylinder Head Parts?
The
cylinder head is the top most part of an engine. It is fitted on the engine
block. Between the cylinder head and cylinder block there is a head gasket. In
all internal combustion engines, the cylinder head provides space for the
passages that feed air fuel mixture to the cylinder other passage that allows
the exhaust to escape. The cylinder head also consists of inlet and exhaust
valves, spark plug or heater plug, valve spring, fuel injectors, camshaft,
valve seal, valve cap or retainer, rocker assembly, small internal passage for
lubricant and coolant to transfer excess heat away from the cylinder head. On
top of the cylinder head, there is a top cover which protects all the internal
parts of the cylinder head against dust and water. This top also known as
tappet cover is also responsible for keeping the oil in the cylinder head so
that there is no oil leakage.
Types Of Cylinder Head Parts
There
are three types of cylinder heads. Though they are different in design and
parts, the function is the same.
- Flat
head cylinder head - These cylinder heads were used on the older
engines such as flathead ford engines. In this, the camshaft is positioned in
the block and not used in today's cars.
- Overhead
valve (OHV) - This type of engine cylinder head is still
used. These cylinder heads have their valves located within them. The valves
are operated indirectly from the camshaft through lifters, pushrods and rocker
arms.
- Overhead
cam (OHC) - This type of cylinder head has the camshaft
located on the head. The OHC can have single or dual camshafts. This system
does not have lifter pushrods or rocker arms. The camshaft directly operates
the inlet and exhaust valves.
Important Features Of Cylinder Head Parts
The
most important function of cylinder head is to open and close the inlet and
exhaust valve. The cylinder head is located at the top of the engine block. It
is made up of aluminum or cast iron. It is capable of withstanding huge
pressure and high temperature while retaining its shape to seal the cylinder
block via head gasket. The cylinder head holds injector valve camshafts, spark
plug etc. The interior of cylinder head is a complex network of oil gallery and
coolant passage. It also has different passages for air fuel mixture and
exhaust gases.
How Does Cylinder Head Parts Works?
The
cylinder head has a number of moving parts. The camshaft gets its drive through
the crankshaft. When the camshaft starts rotating, its cam lobes starts pushing
the valve in downward and upward position. This causes the valve to open and
close at the right moment in relation to the piston. That is to say, on the
intake stroke, we want the intake valve to open and on the exhaust stroke, the
exhaust valve to open. At all other times, the valves should be closed. The
valves must therefore be synchronized with the piston and this happens by
connecting the camshaft to the crankshaft by using a timing belt or timing
chain. The camshaft can be called a mechanical computer which tells each valve
when to open and close. This allows the fuel to get in and exhaust gases to
move out from the cylinder head.
Frequent Problem With Cylinder Head Parts
A
Cylinder head has more moving parts than engine block. It also has more
problems like high oil consumption, bad fuel mileage, engine overheating,
cylinder head crack due to overheating, fuel mixture leakage, head gasket
failure. Oil and coolant getting mixed due to cracks in water jackets or oil
galleries. Valve seal getting damaged, poor performance, misfire engine tappet
noise. These are some of the common problems.
Tools Needed For Cylinder Head Parts
There are a number of skilled auto mechanics who have a goal of opening their own car repair shop at some point in their career. But let’s face it, if you want to put up an efficient as well as profit making shop, then you might need much more than mechanical skills. There are a number of tools which you might need to perform the car repairs quickly as well as reliably. Auto repair equipment that you will need to repair your cylinder head system may include.
- Set Of Spanners
- Set Of Special Tools To Set Engine
Timing
- Screwdriver Set
- Basic Socket Wrench
Set
- Belt Tensioner Gauge
- Valve Lapping Tools
- Click Type Torque Wrench
Top Brands For Cylinder Head Parts
If customers trust a brand, then it would make them loyal, and if they are loyal, then they will surely buy more. We are well aware that customers want comfort, cheerfulness as well as satisfaction in their lives and that’s the reason why we offer top quality auto parts brands to our customers. We make sure to provide a positive experience to our consumers from the brands which we are offering so that they can form an opinion that a particular auto parts brand is trustworthy and would give them peace of mind while they are purchasing it for their car. Here we have listed out some top brands for Cylinder Head Parts.
Related Parts Of Cylinder Head Parts
A cylinder head has the most moving parts. They are small and play a very important role. Camshaft, hardware like, valve, valve seat retainer lock, bucket or tappet, shell bearing valve seal, valve seat for inlet and exhaust, tappet cover. In the cylinder head, there is an oil gallery, water jackets, intake and exhaust port, head gasket and camshaft oil seal. These are important parts of the cylinder head.
- Nuts & Bolts
- Valve Spring
Retainer
- Valve Guide
- Camshaft
- Camshaft Gear Valve Spring
- Inlet And Exhaust Valve
Total Cost And Repair For Cylinder Head Parts
Cost
and repair depend on the defect in the cylinder head. Most of the heads are
removed for blown off head gaskets. Head gaskets are cheap but the labor needed
is very expensive as the high labor costs have most to do with the location of
the head gasket. The head gasket is in the middle of the engine so getting to
them is no easy task. And require removing a lot of equipment. Besides being
time consuming, there’s a good chance that some of the bolts or nuts holding
this equipment on will be frozen or rusted making removal difficult. Even if
you don't have a gasket related problem still the labor will be the same to
remove the cylinder head. It takes about $300 to $600 for replacing the gasket.
How To Change Cylinder Head Parts
Dismantling
-
Remove the tappet cover by losing its bolt. Use a socket to loosen the nuts or
bolts of the camshaft wheel. This will loosen the timing belt, remove all
socket connections, vacuum pipes, air filter connections and other connections
which are attached to the cylinder head. Remove the silencer which is joint
with exhaust manifold. Some engines need a special adaptor tool to fit to some
bolts. If there is some extra space carefully lift off the head complete with
manifolds if possible. As the head is heavy you may need a helper to lift the
head. Remove the head and keep it in a safe place. Remove the head gasket.
Assembling
-
Before assembling check the surface of the cylinder head and cylinder block.
Always take a new head gasket for fitment. Place the gasket on the cylinder
block and carefully place the cylinder head on top of the gasket. Take the
bolts and secure it by tightening it only in circular direction with the help
of a torque wrench. Fit all the removed parts and at last fit the timing belt
by adjusting engine timing.